Linksys Router Reset

Many users have been having a tough time trying to reset the WiFi password of their Linksys wireless routers. Are you one of those users? Is that a yes that we see? Well then, the good thing is that you have landed on the right guide. For your information, doing Linksys router reset WiFi password is possible if you perform Linksys router reset to default factory settings.

Resetting the networking device means every change which has been made to it will go back to its default factory mode. This means that the password of your router will automatically get formatted. Now, you might be thinking about how to do Linksys router reset to default mode thoroughly, right? Well then, follow the guidelines highlighted in this guide.

Here, we have discussed two methods through which restoring your device is possible. They have been outlined here:

  • Hard Reset Method
  • Soft Reset Method

You can go through both methods. Once you are done reading, whichever method you find easier, you can use that to do what you came here for. Continue reading.

Linksys Router Reset via Hard Reset Method

The hard reset method is used by many out there to perform Linksys router reset to default mode due to its easy-to-understand nature. You will be able to execute the process using this method if you carefully walk through the guidelines given here:

  • Look at all sides of your Linksys wireless router in the search for the Reset button.
  • Once you find it, press it, but carefully.
  • Wait for some time.

Note: If after pressing the Reset button, the LED on your networking device starts blinking, for no reason, worry not. You can contact our experts for assistance.

Linksys Router Reset

As soon as your device has successfully been restored to its default mode, it will reboot itself. It is recommended that you do not interrupt the Linksys router reset process, otherwise, you will not be able to do Linksys router reset password unfortunately.

Linksys Router Reset via Soft Reset Method

Also known as the manual reset method; the soft Linksys router reset method is a little longer as compared to the first one. You can follow the instructions mentioned below in order to go about the process using the soft or manual reset method:

  • Plug in the Linksys wireless router and turn it on.
  • Pair up the networking router with the existing modem.
  • Using a computer, open an internet browser.
  • Go to the address bar of the browser and type myrouter.local.
  • Press the Enter key.
  • Before you even know it, the administrative login page will appear on the screen.
  • There you will find two fields; username and password.
  • As per the name of the field, enter the login credentials.
  • Click on the Log In button.
  • When the router’s web-based setup page will appear, go to Administration.
  • Hit the Factory Defaults button.
  • Wait for a couple of seconds.

Once you have successfully done Linksys router reset to default factory settings using Linksys router login username and password, you will also be able to do Linksys router reset WiFi password with ease.

On the off chance, you find yourself stuck during the process; it is recommended that you get in touch with our technical experts for help. Before you even know it, they will provide you with a solution and help you to reset your device in a hassle-free way.

By the way, after you have reset your device, you need to set it up right from scratch. For the guidelines regarding the execution of the process, you need to refer to the user manual. You will find every little detail regarding your networking device in there.

Linksys Router Not Working After Linksys Router Reset?

People prefer performing Linksys router reset to default factory mode so that they get rid of technical issues related to the device. However, if even after resetting the device, you have to experience issues, then what was even the point of executing the process?

Well, don’t stress your brain trying to find an answer to that question. Instead, focus on how you can troubleshoot the issue. For that, continue reading this guide.

Do Linksys Router Setup Again

One of the biggest reasons why you are facing issues after doing Linksys router reset to default factory settings is because you messed up while executing the Linksys router setup process. To take care of the problem, it is suggested that you configure your wireless router again. For that, you can either use the WPS method, Manual method, or the Linksys app. The choice is yours.

Check the Cable Connection

Another reason that might be stopping your device from performing well is a loose cable connection. Thus, if you have used a power cable to connect the router to the wall socket and an Ethernet cable for the establishment of the connection between the networking devices, both connections must be finger-tight. And you can only ensure that if the cables in use are free of damages. Trust us, this will work for you.

Move the WiFi Devices Closer

Are you still not able to make your Linksys router up and running? Well, have a look at the distance separating the networking devices. Is it too much? This is a sign that you ought to place them in proximity. Doing so will ensure that the signals emitted from them are getting transmitted properly without any issues. Once you are done following this hack, check if your Linksys wireless router has started working properly after Linksys router reset.

Need Help?

Hopefully, with the instructions provided in this post, we might have helped you to learn how to perform Linksys router reset to default factory mode. In case you need to learn how to execute any other process, do not think twice before getting in touch with our well-versed technical experts. Regardless of the time at which you contact them, you will find them on their toes to help out users like you. Thus, take advantage of this and contact them now.

Disclaimer: is an independent information provider for various Linksys router and extender related issues. Use of names, trademarks, logos is only for referential purposes. We provide run-time assistance to users who approach us.