Instructional Guide to Fix Linksys Extender Yellow Light Issue
How long has it been since the LED on your Linksys range extender is blinking yellow? Has it been more than two weeks? Well, you should’ve addressed this issue sooner. But, worry not. You still have time. The troubleshooting hacks mentioned in this post will help you resolve the Linksys extender yellow light issue before you even know it. Read on.
Reasons: Linksys Extender Yellow Light Issue
Before troubleshooting the issue at hand, don’t you think you should become aware of the reasons behind it? If you do, it’s a good thing. That way you will be able to rectify the issue in a much more efficient manner.
Here are the top 5 reasons why your Linksys extender is flashing yellow:
- Improper proper supply
- Technical glitches
- Weak Ethernet connection
- Too much distance between devices
- Outdated or corrupted firmware
You can walk through the hacks given below in order to troubleshoot the yellow light issue.
[Solved] Linksys Extender Yellow Light Issue
1. Reboot Your Linksys Extender
Before we tell you about the different ways through which the Linksys extender yellow light issue can be rectified, you should reboot your Linksys wireless range extender. If this hack works for you, following the others won’t be required.
Here is how rebooting your wireless device is possible:
- Unplug your extender from its power outlet.
- Set the power button on your extender to OFF mode.
- Wait for some time.
- You can now turn on your Linksys extender.
- Plug your extender back into its socket.
Check if this hack helped you fix the issue at hand. No? It looks like you need to move to the other hacks after all.
2. Verify the Ethernet Connection
Perhaps you didn’t check the condition of the Ethernet cable before using it to connect your devices. Well, you can do it now. If it is indeed not in a good condition, then what are you waiting for? You should immediately get a new cable to connect your router and extender.
Just make sure that the connection between them is finger-tight. This will ensure smooth transmission of WiFi signals between your devices.
3. Perform Linksys Firmware Update
Another hack that has proved to be beneficial in helping users to fix the Linksys extender yellow light issue is upgrading the firmware.
In case you aren’t sure that you will be able to execute this process like a pro, then follow the instructions mentioned here:
- Open an internet browser on your device.
- Visit extender.linksys.com.
- Then, go to the Linksys extender setup wizard using the default admin details.
- Go to Settings.
- Select the Administration option.
- Click the Firmware Update button.
- Walk through the on-screen instructions.
With that, the Linksys extender firmware update process had concluded. If you need more detailed information about how to go about it, then consider contacting our well-versed technical experts. They will surely be of some assistance to you.
4. Check the Electricity Supply
Are you still stuck with the Linksys extender yellow light issue? Yes? It is probably because your extender is not getting an adequate electricity supply. Therefore, make sure that your device is properly plugged into the wall socket.
If doing so does not do much to troubleshoot the issue, then consider plugging your Linksys extender into another but non-damaged wall socket.
5. Bring Your WiFi Devices Closer
Placing your Linksys extender and router away from each other can create a communication gap between them thereby causing the Linksys extender yellow light issue.
To troubleshoot it, you need to do a simple thing, i.e. bringing your devices close to each other. But, don’t bring them too close. Who knows their WiFi signals might collide? You always have to be on the safe side, right?
Sum Up
The Linksys extender yellow light issue has managed to ruin the internet-usage experience of a number of users. Considering you have been facing the same issue for quite some time, we hope that the aforementioned steps were able to help you fix it.